This is an AutoEConnect Session on the basics of Communication in AUTOSAR. In this session you will learn about the basic configurations involved in configuring CAN Communication Stack. You will find information about configuration of CAN Communication Modules: CAN Driver, CAN Transceiver, CAN NM, CAN SM, CAN IF, CAN TP, PDUR, COM. Our Website: www.autoeconnect.com Our Facebook page: https://www.facebook.com/Autoeconnect-108383907710716/ Our Linkedin group: https://www.linkedin.com/groups/8947529/ Our Instagram page: https://www.instagram.com/autoeconnect/ Our Twitter link: https://twitter.com/AutoEConnect1 YouTube: https://www.youtube.com/channel/UCzmpJqCDd3yqqTz_YED3pYQ

This is an AutoEConnect Session on the basics of Communication in AUTOSAR. In this session you will learn about the basic configurations involved in configuring CAN Communication Stack. You will find information about configuration of CAN Communication Modules: CAN Driver, CAN Transceiver, CAN NM, CAN SM, CAN IF, CAN TP, PDUR, COM. Our Website: www.autoeconnect.com Our Facebook page: https://www.facebook.com/Autoeconnect-108383907710716/ Our Linkedin group: https://www.linkedin.com/groups/8947529/ Our Instagram page: https://www.instagram.com/autoeconnect/ Our Twitter link: https://twitter.com/AutoEConnect1 YouTube: https://www.youtube.com/channel/UCzmpJqCDd3yqqTz_YED3pYQ

The Video explains in detail about the CAN (Controller Area Network) protocol and its Frame Format along with a introduction to ECU by Dr Kaarthick Balakrishnan, Research and Developement Director of Ancit Consulting